{"title":"Navara D40","description":"","products":[{"product_id":"nissan-navara-d40-pu-buchsen-set","title":"Nissan Navara D40 PU Bushing Set","description":"\u003cp data-path-to-node=\"0\"\u003eBring precision back to the road (and off-road)! With the complete suspension bushing set from Polybushings, you can permanently eliminate the spongy handling of your Nissan Pick-up D40. Since the D40 uses leaf springs on the rear axle, worn rubber bushings often lead to an unstable load bed and imprecise handling. Our polyurethane (PU) solutions offer the ideal balance of durability and driving stability for your pickup.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"1\"\u003eWhy Polybushings?\u003c\/h3\u003e\n\u003cp data-path-to-node=\"2\"\u003ePolyurethane is the superior material for load carriers and off-road vehicles. It is significantly more resistant to heavy loads and mechanical stress than standard rubber.\u003c\/p\u003e\n\u003cul data-path-to-node=\"3\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,0,0\"\u003e\u003cb data-path-to-node=\"3,0,0\" data-index-in-node=\"0\"\u003eMaximum Resistance:\u003c\/b\u003e Extremely tear-resistant and abrasion-resistant, ideal for tough work or off-road tours.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,1,0\"\u003e\u003cb data-path-to-node=\"3,1,0\" data-index-in-node=\"0\"\u003eDynamic Stability:\u003c\/b\u003e Maintains axle geometry even under high loads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,2,0\"\u003e\u003cb data-path-to-node=\"3,2,0\" data-index-in-node=\"0\"\u003eWeather Resistant:\u003c\/b\u003e Resistant to oil, UV radiation, and road salt.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,3,0\"\u003e\u003cb data-path-to-node=\"3,3,0\" data-index-in-node=\"0\"\u003eDurability:\u003c\/b\u003e Once installed, these bushings often outlast the rest of the vehicle's life.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"4\"\u003eProduct Details \u0026amp; Configuration\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eThis set is specifically designed for the requirements of the Nissan Pick-up D40.\u003c\/p\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,0,0\"\u003e\u003cb data-path-to-node=\"6,0,0\" data-index-in-node=\"0\"\u003eColor:\u003c\/b\u003e Orange (Standard)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,1,0\"\u003e\u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"0\"\u003eHardness:\u003c\/b\u003e 75 ShA (The perfect blend of comfort and firm handling for road and off-road).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eScope of Delivery (Complete Set)\u003c\/h3\u003e\n\u003cp data-path-to-node=\"8\"\u003eThis set includes the relevant bushings for the front axle and the complete rear leaf spring suspension:\u003c\/p\u003e\n\u003cul data-path-to-node=\"9\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb data-path-to-node=\"9,0,0\" data-index-in-node=\"0\"\u003eFront Upper Wishbones:\u003c\/b\u003e 8-piece (4x PU bushing + 4x metal sleeve) – \u003cb data-path-to-node=\"9,0,0\" data-index-in-node=\"69\"\u003ebushings for burning out\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"0\"\u003eFront Lower Wishbones:\u003c\/b\u003e 8-piece (4x PU bushing + 4x metal sleeve) – \u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"70\"\u003ebushings for burning out\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,2,0\"\u003e\u003cb data-path-to-node=\"9,2,0\" data-index-in-node=\"0\"\u003eRear Leaf Springs (front):\u003c\/b\u003e 4-piece (2x PU bushing + 2x metal sleeve)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,3,0\"\u003e\u003cb data-path-to-node=\"9,3,0\" data-index-in-node=\"0\"\u003eRear Leaf Springs (rear):\u003c\/b\u003e 4-piece (2x PU bushing + 2x metal sleeve)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,4,0\"\u003e\u003cb data-path-to-node=\"9,4,0\" data-index-in-node=\"0\"\u003eLeaf Spring Shackles:\u003c\/b\u003e 4-piece (2x PU bushing + 2x metal sleeve)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,5,0\"\u003e\u003cb data-path-to-node=\"9,5,0\" data-index-in-node=\"0\"\u003eFront Stabilizer:\u003c\/b\u003e 2x PU bushing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e⚠️ Important Installation Note\u003c\/h3\u003e\n\u003cp data-path-to-node=\"11\"\u003eThe front wishbone bushings are \u003cb data-path-to-node=\"11\" data-index-in-node=\"48\"\u003e\"burn-out bushings\"\u003c\/b\u003e. It is absolutely essential to leave the outer metal casing (the outer shell) of the original bushing in the wishbone! Only the old rubber is removed so that the new polybushings can be inserted into the remaining sleeve.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatible Vehicle Models\u003c\/h3\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eNissan Pick-up \/ Navara D40:\u003c\/b\u003e Model years 2005 – 2014\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003eGive your D40 the suspension upgrade it deserves – for more safety and stability with every load!\u003c\/p\u003e","brand":"Polybuchsen","offers":[{"title":"Default Title","offer_id":53618968330567,"sku":"PB-NID4001","price":189.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/150826_132731.jpg?v=1774882295"},{"product_id":"winch-mounting-plate-for-nissan-navara-d40-2005-2010","title":"Mounting plate for winch Nissan Navara D40 2005-2010","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003ePerfectly fitting for both: The invisible recovery reserve for Navara and Pathfinder!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eMorE 4x4 Winch Mounting Plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"4\" data-index-in-node=\"44\"\u003eNissan Navara D40\u003c\/b\u003e and the \u003cb data-path-to-node=\"4\" data-index-in-node=\"70\"\u003eNissan Pathfinder R51\u003c\/b\u003e (pre-facelift models from model years 2005 to 2010) is the perfect foundation to equip your pickup or off-road SUV for demanding work, hunting, or challenging tours. Since both vehicles are based on the identical platform, this mounting plate is an absolutely perfect fit for both models.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eIt allows for the concealed installation of an electric winch directly behind the original front bumper – thus maintaining the classic factory appearance of your Nissan while providing maximum safety off-road.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e⚠️ IMPORTANT NOTE ON COMPATIBILITY:\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eModel Period:\u003c\/b\u003e Only suitable for \u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"32\"\u003epre-facelift models (2005 to 2010)\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e Suitable for all engine versions of the Navara D40. For the \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"68\"\u003eNissan Pathfinder R51\u003c\/b\u003e, the plate is \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"105\"\u003eONLY suitable for diesel models\u003c\/b\u003e (petrol models are excluded).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003ci data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eLooking for a model for the facelift generation from 2010 onwards? Mounting plates for other model years can be found directly in our shop!\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003ePerfect double fit:\u003c\/b\u003e Tailor-made for both the \u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"56\"\u003eNissan Navara D40\u003c\/b\u003e and the \u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"91\"\u003ePathfinder R51 (2005–2010)\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003eUncompromising Strength:\u003c\/b\u003e Made from solid, \u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"49\"\u003e6 mm thick quality steel\u003c\/b\u003e that effortlessly withstands the enormous tensile loads and forces during heavy off-road recoveries.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003eUniversal winch mount:\u003c\/b\u003e Designed for the secure and torsion-resistant mounting of all common electric standard off-road winches.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-path-to-node=\"11,3,0\" data-index-in-node=\"0\"\u003eTriple protection against corrosion:\u003c\/b\u003e To give rust, mud, and road salt absolutely no chance, the MorE 4x4 plates are extensively sandblasted, hot-dip galvanized, and finally finished with an impact-resistant, black powder coating.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,4,0\"\u003e\u003cb data-path-to-node=\"11,4,0\" data-index-in-node=\"0\"\u003eReady for direct installation:\u003c\/b\u003e Each mounting plate comes with a complete, vehicle-specific screw set required for proper mounting directly on the vehicle frame.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Nissan Navara D40 \u0026amp; Nissan Pathfinder R51 (Pre-facelift, model years 2005–2010)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eRestriction:\u003c\/b\u003e Not suitable for Pathfinder R51 with petrol engine\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eWinch compatibility:\u003c\/b\u003e All common standard electric winches\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003eSurface finish:\u003c\/b\u003e Sandblasted, galvanized, and black powder-coated\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,5,0\"\u003e\u003cb data-path-to-node=\"13,5,0\" data-index-in-node=\"0\"\u003eMounting location:\u003c\/b\u003e Concealed behind the original front bumper\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e 1x winch mounting plate, 1x vehicle-specific screw and mounting set.\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54070524182855,"sku":"MO-PW030","price":359.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/plyta-montazowa-wyciagarki-nissan-navara-d40-05-10.jpg?v=1780583919"},{"product_id":"winch-mounting-plate-for-nissan-navara-d40-2010-2014","title":"Mounting plate for winch Nissan Navara D40 2010-2014","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eThe invisible recovery reserve for the 4-cylinder facelift models!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eMorE 4x4 Winch Mounting Plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"4\" data-index-in-node=\"44\"\u003eNissan Navara D40\u003c\/b\u003e and the \u003cb data-path-to-node=\"4\" data-index-in-node=\"70\"\u003eNissan Pathfinder R51\u003c\/b\u003e (facelift models from 2010 to 2014) provides the perfect basis to equip your pickup or off-road SUV with a powerful winch. As the front section was revised after the 2010 facelift, this mounting plate is precisely adapted to the altered space conditions of the model updates.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eIt allows for concealed and secure installation of an electric winch directly behind the original front bumper. This preserves the familiar factory design of your Nissan, while providing maximum recovery safety in rough terrain, forests, or on expeditions.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e⚠️ IMPORTANT COMPATIBILITY NOTE:\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eModel Period:\u003c\/b\u003e Suitable for the \u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"32\"\u003efacelift models (model years 2010 to 2014)\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e This variant is designed for 4-cylinder models (e.g., the \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"72\"\u003e2.5 dCi\u003c\/b\u003e). It \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"96\"\u003edoes NOT fit the large 3.0L V6 diesel models!\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003ci data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eLooking for the plate for the powerful 3.0L V6 or for the early pre-facelift models (2005–2010)? These variants can also be found directly in our shop!\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailored to the space conditions at the front of the \u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"87\"\u003eNissan Navara D40 \u0026amp; Pathfinder R51 Facelift (without V6)\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003eUncompromising strength:\u003c\/b\u003e Made from solid, \u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"49\"\u003e6 mm thick quality steel\u003c\/b\u003e, which effortlessly withstands the enormous tensile loads during recovery in tough off-road conditions.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003eUniversal winch mount:\u003c\/b\u003e Designed for the secure and torsion-resistant mounting of all common electric standard off-road winches.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-path-to-node=\"11,3,0\" data-index-in-node=\"0\"\u003eTriple protection against corrosion:\u003c\/b\u003e To prevent rust, mud, and road salt, the MorE 4x4 plates are elaborately sandblasted, hot-dip galvanized, and finally finished with an impact-resistant, black powder coating.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,4,0\"\u003e\u003cb data-path-to-node=\"11,4,0\" data-index-in-node=\"0\"\u003eReady for direct installation:\u003c\/b\u003e Each mounting plate comes with a complete, vehicle-specific screw set required for proper mounting directly on the vehicle frame.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eTechnical Data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Nissan Navara D40 \u0026amp; Nissan Pathfinder R51 (Facelift, model years 2010–2014)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eExclusion:\u003c\/b\u003e Not compatible with the 3.0L V6 engine\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eWinch compatibility:\u003c\/b\u003e All common electric standard winches\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003eSurface finish:\u003c\/b\u003e Sandblasted, galvanized, and black powder-coated\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,5,0\"\u003e\u003cb data-path-to-node=\"13,5,0\" data-index-in-node=\"0\"\u003eInstallation location:\u003c\/b\u003e Concealed behind the original front bumper\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e 1x winch mounting plate, 1x vehicle-specific screw and mounting set.\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54070524346695,"sku":"MO-PW022","price":359.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/plyta-montazowa-wyciagarki-nissan-navara-d40-10-14.jpg?v=1780583919"},{"product_id":"winch-mounting-plate-for-nissan-navara-d40-2010-2014-3-0l-v6","title":"Winch Mounting Plate Nissan Navara D40 2010-2014 3.0L V6","description":"\u003cp data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eThe invisible recovery reserve for the powerful V6 models!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eMorE 4x4 winch mounting plate\u003c\/b\u003e for the \u003cb data-path-to-node=\"4\" data-index-in-node=\"44\"\u003eNissan Navara D40\u003c\/b\u003e and the \u003cb data-path-to-node=\"4\" data-index-in-node=\"70\"\u003eNissan Pathfinder R51\u003c\/b\u003e (facelift models from 2010 to 2014) was specially developed for vehicles with the powerful \u003cb data-path-to-node=\"4\" data-index-in-node=\"187\"\u003e3.0L V6 diesel engine (V9X)\u003c\/b\u003e. Since the front section and the radiator arrangement were changed in the large V6 models after the facelift, this plate is precisely adapted to the space conditions there.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eIt enables the concealed and secure installation of an electric winch directly behind the original front bumper. This preserves the powerful factory design of your V6 Nissan, while you have maximum safety at hand in rough terrain, when shopping, in the forest or on expeditions.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e⚠️ IMPORTANT NOTE ON COMPATIBILITY:\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eModel period:\u003c\/b\u003e Suitable for \u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"32\"\u003efacelift models (model years 2010 to 2014)\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eEngine:\u003c\/b\u003e This version is \u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"34\"\u003especifically designed for the 3.0L V6 diesel engines\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003ci data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eAre you looking for the plate for early models (2005–2010) or other engine versions? You can also find mounting plates for the pre-facelift generation in our shop!\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003ePrecisely developed for the V6:\u003c\/b\u003e Tailor-made for the tight space conditions at the front of the \u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"94\"\u003eNissan Navara D40 \u0026amp; Pathfinder R51 with the 3.0L V6 diesel\u003c\/b\u003e.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003eUncompromising strength:\u003c\/b\u003e Made from solid, \u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"49\"\u003e6 mm thick quality steel\u003c\/b\u003e, which easily withstands the enormous tensile loads when recovering heavy, fully loaded travel vehicles.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003eUniversal winch mount:\u003c\/b\u003e Designed for the secure and torsion-resistant mounting of all common electric standard off-road winches.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-path-to-node=\"11,3,0\" data-index-in-node=\"0\"\u003eTriple protection against corrosion:\u003c\/b\u003e To give rust, mud and road salt no chance, the MorE 4x4 plates are elaborately sandblasted, hot-dip galvanized and finally finished with an impact-resistant, black powder coating.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"11,4,0\"\u003e\u003cb data-path-to-node=\"11,4,0\" data-index-in-node=\"0\"\u003eReady for direct installation:\u003c\/b\u003e Each mounting plate comes with a complete, vehicle-specific screw set, which is required for professional mounting directly on the vehicle frame.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eSuitable for:\u003c\/b\u003e Nissan Navara D40 \u0026amp; Nissan Pathfinder R51 (Facelift, model years 2010–2014)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eEngine variant:\u003c\/b\u003e Specifically for \u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"28\"\u003e3.0L V6 Diesel\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality steel\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eWinch compatibility:\u003c\/b\u003e All common electric standard winches\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003eSurface finish:\u003c\/b\u003e Sandblasted, galvanized and black powder-coated\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp data-path-to-node=\"13,5,0\"\u003e\u003cb data-path-to-node=\"13,5,0\" data-index-in-node=\"0\"\u003eMounting location:\u003c\/b\u003e Concealed behind the original front bumper\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e 1x winch mounting plate, 1x vehicle-specific screw and mounting set.\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54070524412231,"sku":"MO-PW037","price":369.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/plyta-montazowa-wyciagarki-nissan-navara-d40-10-14-3l.jpg?v=1780583919"},{"product_id":"aluminium-unterfahrschutz-motor-nissan-navara-d40-pathfinder-r51","title":"Aluminium Underrun Protection Engine \u0026 Steering Nissan Navara D40 Pathfinder R51","description":"\u003cp\u003e\u003cb\u003eMassive front and underbody protection for the popular Nissan 4x4 platform – highly effective protection for engine, front axle, and steering linkage!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 aluminum combination skid plate\u003c\/b\u003e for the \u003cb\u003eNissan Navara D40\u003c\/b\u003e (pickup) and the identical \u003cb\u003eNissan Pathfinder R51\u003c\/b\u003e (SUV) from model years 2005 to 2010 (pre-facelift models) offers high-strength, extensive protection for the most important mechanical components at the vehicle front and front underbody: the \u003cb\u003eengine (including oil pan)\u003c\/b\u003e, the \u003cb\u003efront axle differential\u003c\/b\u003e, and the vulnerable \u003cb\u003etie rods and steering cables\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eBoth the Navara and the Pathfinder are extremely popular vehicles for long-distance travel, overlanding, and heavy commercial use. Since both models feature independent front suspension, steering components, tie rods, and the front differential are unprotected in the potential impact area. Careless grounding on sharp rocks, massive tree stumps, or hard impacts in deep ruts can irreparably bend the steering or tear open the engine oil pan – leading to immediate oil loss and catastrophic engine damage.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific 3-in-1 underbody protection perfectly closes this critical safety gap in the underbody. Thanks to its well-thought-out design, this skid plate \u003cb\u003ecan be installed completely independently and separately\u003c\/b\u003e, without necessarily requiring the remaining plates of the underbody system to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note regarding product images:\u003c\/b\u003e To show you the full extent of the underbody protection on the vehicle, some photos depict multiple skid plates. The scope of delivery for this item includes only the front \u003cb\u003eengine, differential, and tie rod skid plate\u003c\/b\u003e. The other skid plates (for main gearbox, transfer case, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eNissan Navara D40\u003c\/b\u003e and \u003cb\u003ePathfinder R51\u003c\/b\u003e from model years \u003cb\u003e2005–2010 (pre-facelift)\u003c\/b\u003e – suitable for all engine variants (such as the proven 2.5 dCi).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003e3-in-1 protection area:\u003c\/b\u003e Highly effectively secures the \u003cb\u003eengine\u003c\/b\u003e, the \u003cb\u003efront axle differential\u003c\/b\u003e, and the complete \u003cb\u003esteering linkage (tie rods)\u003c\/b\u003e against mechanical impacts and frontal impacts from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaximum bumper flexibility:\u003c\/b\u003e The intelligent design fits both under the \u003cb\u003eoriginal factory front bumper\u003c\/b\u003e and under the \u003cb\u003eMorE 4x4 steel bumper (model Z017)\u003c\/b\u003e. A later bumper upgrade is therefore possible without replacing the underbody protection!\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made from high-quality, \u003cb\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for the front axle.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy plug-and-play installation:\u003c\/b\u003e No drilling, cutting, or welding on the vehicle required! The included fastening kit exclusively uses the \u003cb\u003eoriginal factory drilled holes and threads in the ladder frame\u003c\/b\u003e. Reversal to series condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Looking for an alternative material variant?\u003c\/h3\u003e\n\u003cp\u003eThis product is optimally adaptable to your needs. Feel free to contact us if you need the following alternative version:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eIn robust steel:\u003c\/b\u003e Also available as a 4 mm steel variant (item SKU: \u003cb\u003eMO-OP064\u003c\/b\u003e).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Nissan Navara D40 \u0026amp; Nissan Pathfinder R51 (model years 2005–2010 \/ pre-facelift)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine type:\u003c\/b\u003e All engine types\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Engine oil pan, front differential, and tie rods\/steering\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFront compatibility:\u003c\/b\u003e Fits under factory bumper \u0026amp; MorE 4x4 steel bumper Z017\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eInstallation:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x aluminum combination skid plate (engine\/axle beam\/tie rods)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for gearbox, transfer case, or fuel tank are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54125756875079,"sku":"MO-OPA064","price":419.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-przednia-oslona-podwozia-silnika-nissan-navara-d40-05-10.jpg?v=1781723057"},{"product_id":"aluminium-unterfahrschutz-getriebeschutz-nissan-navara-d40-pathfinder-r51","title":"Aluminum Underrun Protection Gearbox Nissan Navara D40 Pathfinder","description":"\u003cp\u003e\u003cb\u003eReliable protection for your Nissan's automatic or manual transmission – Highly effective safeguarding of your vehicle's mechanical core!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 aluminum transmission skid plate\u003c\/b\u003e for the \u003cb\u003eNissan Navara D40\u003c\/b\u003e (pickup) and the structurally identical \u003cb\u003eNissan Pathfinder R51\u003c\/b\u003e (SUV) from model years 2005 to 2014 offers high-strength protection for your vehicle's sensitive main transmission housing. Since the transmission is located relatively centrally under the vehicle, it is particularly vulnerable when traversing bumps, hard impacts on rocks, tree stumps, driving over obstacles off-road, or sliding through deep ruts in mud. A mechanical impact off-road can quickly lead to cracks in the housing, fatal transmission oil loss, and extremely expensive damage to the transmission, immediately ending your tour or work assignment.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific underbody protection perfectly closes this critical security gap on the underbody. Thanks to its well-engineered design, this skid plate \u003cb\u003ecan be mounted completely independently and separately\u003c\/b\u003e, without necessarily requiring other plates of the underbody system (such as the front engine or rear transfer case protection) to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note on product images:\u003c\/b\u003e To show you the complete course of the underbody protection on the vehicle, some photos depict multiple skid plates. The scope of delivery for this item includes only the \u003cb\u003etransmission skid plate\u003c\/b\u003e. The other skid plates (for engine, transfer case, fuel tank, etc.) are not included but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eNissan Navara D40\u003c\/b\u003e and \u003cb\u003ePathfinder R51 (model years 2005–2014)\u003c\/b\u003e – suitable for all engine variants (such as the 2.5 dCi and 3.0 V6 dCi) and transmission types.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eRobust protection at the center:\u003c\/b\u003e Reliably protects the main transmission housing from mechanical impacts, deformations, and foreign objects from below.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made from high-quality, \u003cb\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for your 4x4's chassis.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy Plug-and-Play installation:\u003c\/b\u003e No drilling, cutting, or welding on the car! Each skid plate comes with a complete mounting kit that utilizes the \u003cb\u003eoriginal factory drilled holes and threads in the solid ladder frame\u003c\/b\u003e. Reverting to the stock condition is easily possible at any time.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFlat design:\u003c\/b\u003e The smooth surface ensures that the vehicle can slide over obstacles in an emergency, instead of getting stuck on the transmission.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Looking for an alternative version?\u003c\/h3\u003e\n\u003cp\u003eThis product is optimally customizable to your needs. Please contact us if you require the following alternative version:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eIn robust steel:\u003c\/b\u003e Also available as a 4 mm steel variant (article SKU: \u003cb\u003eMO-OP065\u003c\/b\u003e).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Nissan Navara D40 \u0026amp; Nissan Pathfinder R51 (model years 2005–2014)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine:\u003c\/b\u003e All engine variants\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Main transmission \/ transmission housing\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x aluminum transmission skid plate\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates visible in the photos for the engine, transfer case, or fuel tank are not included and are available separately in our shop).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54126177747271,"sku":"MO-OPA065","price":299.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-podwozia-skrzyni-biegow-nissan-navara-d40-05-14_1181d441-af70-45f1-ade5-2c5bf935dcd3.jpg?v=1781722890"},{"product_id":"aluminium-unterfahrschutz-verteilergetriebe-nissan-navara-d40-pathfinder-r51","title":"Aluminum underbody protection transfer case Nissan Navara D40 Pathfinder","description":"\u003cp\u003e\u003cb\u003eMaximum protection for your Nissan's transfer case – the life insurance for your all-wheel drive on tour and expedition!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMorE 4x4 aluminum transfer case skid plate\u003c\/b\u003e for the \u003cb\u003eNissan Navara D40\u003c\/b\u003e (pickup) and the structurally identical \u003cb\u003eNissan Pathfinder R51\u003c\/b\u003e (SUV) from model years 2005 to 2014 protects one of the most important and at the same time most vulnerable components on your vehicle's underbody. The transfer case sits relatively centrally under the vehicle and is particularly exposed when crossing crests, extreme articulation in off-road terrain, hard impacts on rocks, or driving over thick tree stumps. Mechanical damage at this point usually means the immediate end of the journey and incurs immense repair costs.\u003c\/p\u003e\n\u003cp\u003eThis vehicle-specific underbody protection reliably closes this critical safety gap on the underbody. Thanks to its well-engineered design, this skid plate \u003cb\u003ecan be mounted completely independently and separately\u003c\/b\u003e, without necessarily requiring other plates of the underbody system (such as the front engine or main transmission protection) to be installed.\u003c\/p\u003e\n\u003cblockquote\u003e\n\n\u003cp\u003e💡 \u003cb\u003eImportant note regarding product images:\u003c\/b\u003e To show you the full course of the underbody protection on the vehicle, some photos show multiple skid plates. The scope of delivery for this item includes only the \u003cb\u003etransfer case skid plate\u003c\/b\u003e. The other skid plates (for engine, main transmission, etc.) are not included in the scope of delivery but can be purchased separately in our shop.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003cb\u003eYour advantages at a glance:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePerfectly vehicle-specific:\u003c\/b\u003e Tailor-made for the \u003cb\u003eNissan Navara D40\u003c\/b\u003e and \u003cb\u003ePathfinder R51 (model years 2005–2014)\u003c\/b\u003e – suitable for all engine variants (such as the 2.5 dCi and 3.0 V6 dCi) and all drive variants.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eLight \u0026amp; extremely robust:\u003c\/b\u003e Made from high-quality, \u003cb\u003e6 mm thick aluminum\u003c\/b\u003e. This offers the ideal balance of uncompromising stability for tough off-road use and minimal additional weight for your all-wheel drive vehicle's suspension.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEasy Plug-and-Play installation:\u003c\/b\u003e No drilling, cutting, or welding on the car! Each skid plate comes with a complete mounting kit that utilizes the \u003cb\u003eoriginal factory holes and threads in the solid ladder frame\u003c\/b\u003e of your Nissan. Reversion to the factory condition is possible at any time without problems.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eOff-road proven construction:\u003c\/b\u003e Years of experience in severe terrain go into the development of MorE 4x4 protectors. They distribute impact forces broadly into the robust frame and reliably prevent mechanical damage to the underbody.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e🛠️ Looking for an alternative version?\u003c\/h3\u003e\n\u003cp\u003eThis product can be optimally adapted to your needs. Please contact us if you require the following alternative version:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eIn robust steel:\u003c\/b\u003e Also available as a 4 mm steel version (item SKU: \u003cb\u003eMO-OP066\u003c\/b\u003e).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e Nissan Navara D40 \u0026amp; Nissan Pathfinder R51 (model years 2005–2014)\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEngine type:\u003c\/b\u003e All engine variants\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProtection area:\u003c\/b\u003e Transfer case\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 6 mm high-strength quality aluminum\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMounting:\u003c\/b\u003e Directly to existing frame points (screw set included)\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x aluminum transfer case skid plate\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e1x vehicle-specific mounting and screw set \u003ci\u003e(Note: Other skid plates for the engine or main transmission visible in the photos are not included in the scope of delivery and are available separately from us).\u003c\/i\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54126179189063,"sku":"MO-OPA066","price":349.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/aluminiowa-oslona-podwozia-reduktora-nissan-navara-d40-05-14_3acadba8-c0ea-4194-a0f5-e37b34156a50.jpg?v=1781722910"},{"product_id":"stahl-unterfahrschutz-motor-lenkung-nissan-navara-d40-pathfinder-r51","title":"Steel Underbody Protection Engine \u0026 Steering Nissan Navara D40 Pathfinder R51","description":"\u003ch2\u003eMorE 4x4 Steel Skid Plate for Engine, Front Axle Differential and Steering Linkage – Nissan Navara D40 \/ Pathfinder R51\u003c\/h2\u003e\n\u003cp\u003eWhen a heavy-duty off-roader or overland pickup is put to the test off-road, it's not the large obstacles that cause problems first – it's the harsh, sharp impacts on rock steps, hidden tree stumps in the undergrowth, and the relentless scraping in deep ruts. This is precisely where the vehicle's sensitive front section is in the line of fire: the engine, front axle differential, and steering linkage are permanently at risk of being brutally damaged by a single hard impact.\u003c\/p\u003e\n\u003cp\u003eThis custom-fit steel skid plate from MorE 4x4 was developed to absorb precisely such critical hits before a brief ground contact turns into astronomically expensive damage. It reliably protects against hairline cracks or fractures in the differential housing, against bent steering components, and against consequential damage from oil loss, which can render the vehicle inoperable at the worst possible moment – in the middle of nowhere, far from any workshop.\u003c\/p\u003e\n\u003cp\u003eThe design is geared towards maximum practicality: robust, precise, uncompromising. Thanks to mounting on the original frame points, the skid plate sits rock-solid without the need to purchase a complete underbody system. This single plate can be installed completely independently and separately – a clean, efficient solution for anyone who wants to specifically and high-quality secure their Nissan Navara D40 or Pathfinder R51.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Details \/ Product Features\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSuitable for: Nissan Navara D40 \/ Pathfinder R51, model years 2005–2010 (pre-facelift), all engine variants\u003c\/li\u003e\n\n  \u003cli\u003eMaterial: Steel, 4 mm thickness\u003c\/li\u003e\n\n  \u003cli\u003eSurface: two-layer powder coating in black\u003c\/li\u003e\n\n  \u003cli\u003eMounting: Utilizes original drillings and threads in the vehicle frame\u003c\/li\u003e\n\n  \u003cli\u003eDesigned for mounting under series bumpers as well as under the MorE 4x4 steel bumper (MO-Z017)\u003c\/li\u003e\n\n  \u003cli\u003eIndependently mountable individual skid plate, no complete underbody system required\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cp\u003eThe product images may show multiple skid plates to illustrate the entire MorE 4x4 underbody system. The scope of delivery for this item includes only the front skid plate described here for the engine, front axle differential, and steering linkage.\u003c\/p\u003e\n\n\u003ch3\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAluminum, 6 mm – MO-OPA064\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54126188495175,"sku":"MO-OP064","price":469.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-przednia-oslona-podwozia-silnika-nissan-navara-d40-05-10_2f852b78-9180-4238-83da-d8c163e56d50.jpg?v=1781100165"},{"product_id":"stahl-unterfahrschutz-getriebe-nissan-navara-d40-pathfinder-r51","title":"Steel Underride Protection Gearbox Nissan Navara D40 Pathfinder R51","description":"\u003ch2\u003eMorE 4x4 Steel Underbody Protection for Main Gearbox – Robust Protection for Nissan Navara D40 \/ Pathfinder R51\u003c\/h2\u003e\n\u003cp\u003eIn the harsh reality of off-road driving, it's not the major obstacles that strike first, but the invisible dangers beneath: sharp rocks, hard impacts in washed-out ruts, hidden tree stumps in the undergrowth, and abrupt undulations that brutally press the drivetrain against the ground. This is precisely where precise, durable protection determines whether you continue or are stranded. This MorE 4x4 skid plate for the main gearbox reliably protects the underbody from mechanical impacts that can otherwise quickly lead to costly damage.\u003c\/p\u003e\n\u003cp\u003eOne blow in the wrong place is enough to turn a seemingly harmless contact into an astronomically expensive defect: deformed housing parts, hairline cracks, oil loss, damaged attachments, or, in the worst case, sudden immobility in the middle of nowhere. For heavy-duty off-roaders and long-distance travel vehicles, this area is highly critical – because the main gearbox is exposed and must be protected against anything that impacts from below when off-road. MorE 4x4 provides a perfectly fitting, uncompromising solution for maximum safety under the toughest conditions.\u003c\/p\u003e\n\u003cp\u003eThe skid plate is designed vehicle-specifically and can be mounted completely independently and separately – without the obligation to purchase a complete underbody system. It fits cleanly into the original mounting points of the ladder frame and offers exactly the protection that demanding off-road use requires: robust, functional, and designed for maximum durability.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Details \/ Product Features\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\n  \u003cli\u003eMaterial thickness: 4 mm\u003c\/li\u003e\n\n  \u003cli\u003eSuitable for: Nissan Navara D40 \/ Pathfinder R51\u003c\/li\u003e\n\n  \u003cli\u003eModel years: 2005–2014\u003c\/li\u003e\n\n  \u003cli\u003eSuitable for all engine types\u003c\/li\u003e\n\n  \u003cli\u003eMounts to original frame points and threads\u003c\/li\u003e\n\n  \u003cli\u003eIncludes mounting kit with screws\u003c\/li\u003e\n\n  \u003cli\u003eSteel parts with two-layer powder coating in black\u003c\/li\u003e\n\n  \u003cli\u003eVehicle-specifically developed for off-road and expedition use\u003c\/li\u003e\n\n  \u003cli\u003eCan be mounted independently and separately, without additional underbody system\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cp\u003eFor illustration purposes of the complete system, several skid plates may be shown in the product images. The scope of delivery for this item includes only the skid plate for the main gearbox described here.\u003c\/p\u003e\n\n\u003ch3\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAluminium 6 mm – MO-OPA065\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54126188593479,"sku":"MO-OP065","price":329.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-podwozia-skrzyni-biegow-nissan-navara-d40-05-14_9e2ac220-495b-4ea3-8b4c-cbb480a35659.jpg?v=1781100166"},{"product_id":"stahl-unterfahrschutz-verteilergetriebe-nissan-navara-d40-pathfinder-r51","title":"Steel Underride Protection Transfer Case Nissan Navara D40 Pathfinder R51","description":"\u003ch2\u003eMorE 4x4 Steel Transfer Case Skid Plate – Nissan Navara D40 \/ Pathfinder R51\u003c\/h2\u003e\n\u003cp\u003eAnyone driving a Nissan Navara D40 or Pathfinder R51 off-road knows the brutal reality of the terrain: sharp rocks, hard impacts after wave crests, hidden tree stumps in the undergrowth, and deep, washed-out ruts don't wait for the perfect moment. Precisely where a heavy-duty off-roader has to work the hardest, the transfer case is particularly exposed – and a single precise blow from below can turn a challenging passage into an expensive forced break.\u003c\/p\u003e\n\u003cp\u003eThis massive skid plate from MorE 4x4 was developed to effectively prevent precisely such catastrophes: hairline cracks or fractures in the transfer case housing, dangerous oil loss, consequential damage from tearing components, and in the worst case, sudden immobility in the middle of nowhere. Instead of risky improvisation, the underbody receives a robust, perfectly fitting armor that provides real security in long-distance travel and expedition use.\u003c\/p\u003e\n\u003cp\u003eEspecially strong: This skid plate can be mounted completely independently and separately. There is no compulsion to buy a complete underbody system. It can be integrated into the vehicle as a targeted individual component and precisely protects the area that is most likely to experience the hardest contact off-road.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Details \/ Product Features\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSuitable for: Nissan Navara D40 \/ Pathfinder R51, model years 2005-2014, all engine types\u003c\/li\u003e\n\n  \u003cli\u003eProtection area: Transfer case\u003c\/li\u003e\n\n  \u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\n  \u003cli\u003eMaterial thickness: 4 mm\u003c\/li\u003e\n\n  \u003cli\u003eSurface: Two-layer black powder coating\u003c\/li\u003e\n\n  \u003cli\u003eMounts to original attachment points and threads in the frame\u003c\/li\u003e\n\n  \u003cli\u003eIncludes mounting kit with screws\u003c\/li\u003e\n\n  \u003cli\u003eIndependent single mounting possible, regardless of other underbody protection components\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cp\u003eThe product images may show several skid plates to illustrate the complete system. The scope of delivery for this item includes only the transfer case skid plate described here.\u003c\/p\u003e\n\n\u003ch3\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAluminum 6 mm: MO-OPA066\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54126188659015,"sku":"MO-OP066","price":379.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/stalowa-oslona-podwozia-reduktora-nissan-navara-d40-05-14_584c6161-1c22-4fba-aca6-5263c1f5d4af.jpg?v=1781100166"},{"product_id":"seilwindenstossstange-nissan-navara-d40-pathfinder-r51-2005-2010","title":"Winch Bumper Nissan Navara D40 \/ Pathfinder R51 2005-2010","description":"\u003cp\u003eWhen the original plastic front becomes a weak point in off-road terrain, the real action begins for the MorE 4x4 Heavy-Duty Offroader: Sharp-edged rocks, hidden tree stumps, deep ruts and hard edges of blocked passages don't meet fragile standard material with a steel front bumper, but uncompromising reserves. This off-road bumper was developed precisely for this – to protect the front of your Nissan Navara D40 or Pathfinder R51 where standard components would have long since capitulated.\u003c\/p\u003e\n\u003cp\u003eThe construction made of 6, 4 and 3 mm thick steel provides the necessary substance for serious expeditions, tough tracks and demanding off-road use. Massive frame side supports additionally stabilize the long surfaces and ensure clean power transmission into the ladder frame. This effectively reduces expensive consequential damage to coolers, bodywork, front structure and frame – damage that can quickly cause astronomical costs in everyday long-distance travel and overlanding.\u003c\/p\u003e\n\u003cp\u003eFor precise installation, the bumper offers stepless three-point adjustment in three planes and integrates a winch plate, two mounts for auxiliary or fog lights, and reinforced shackle mounts ex works. The high-end finish with shot blasting, arc zinc spray coating, Sahara polyester powder coating and black textured paint in a fine crack look underlines the extremely robust character and permanently protects the surface against the toughest conditions on and off-road.\u003c\/p\u003e\n\u003ch3\u003eTechnical Details \/ Product Features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Nissan Navara D40 \/ Pathfinder R51, model years 2005–2010 (pre-facelift), all engine types\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial thicknesses:\u003c\/strong\u003e 6 mm, 4 mm and 3 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Stepless adjustment in three planes \/ three directions\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFrame connection:\u003c\/strong\u003e Massive, bolted side supports for connection to the frame\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWinch mount:\u003c\/strong\u003e Integrated winch plate as standard\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLight holders:\u003c\/strong\u003e Two integrated holders for daytime running or fog lights\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eRecovery points:\u003c\/strong\u003e Reinforced shackle mounts\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSurface treatment:\u003c\/strong\u003e Shot blasting, arc zinc spray coating and Sahara polyester powder coating\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSurface:\u003c\/strong\u003e Black textured paint with a fine crack look\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNote on scope of delivery:\u003c\/strong\u003e Price applies to the front bumper without optional accessories\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Registration Note\u003c\/h3\u003e\n\u003cp\u003ePlease note: This off-road bumper does not have a general operating permit (ABE), no TÜV parts certificate and no regular road approval under German road traffic regulations (StVZO). If the vehicle is to be driven on public roads, the following applies: Any potential registration by means of individual acceptance (§ 21 StVZO) must be clarified individually with the respective TÜV, Dekra or KÜS inspector on site before purchase.\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"No \/ no lighting","offer_id":54229710668103,"sku":"MO-Z017","price":1329.95,"currency_code":"EUR","in_stock":true},{"title":"No \/ Wesem LED Fog Lights","offer_id":54229710700871,"sku":"MO-Z017-1","price":1469.95,"currency_code":"EUR","in_stock":true},{"title":"No \/ Wesem LED Daytime Running Lights","offer_id":54229710733639,"sku":"MO-Z017-2","price":1469.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ no lighting","offer_id":54229710766407,"sku":"MO-Z017-3","price":1399.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ Wesem LED Fog Lights","offer_id":54229710799175,"sku":"MO-Z017-4","price":1529.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ Wesem LED Daytime Running Lights","offer_id":54229710831943,"sku":"MO-Z017-5","price":1529.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/zderzak-przedni-stalowy-more-4x4-nissan-navara-d40-pathfinder-r51-05-10_805a4838-c279-4ee6-bdc6-eb5460d2d45b.jpg?v=1782394705"},{"product_id":"stahl-heckstossstange-nissan-navara-d40","title":"Steel Rear Bumper Nissan Navara D40","description":"\u003cp\u003eThe Nissan Navara D40 is rarely a fair-weather vehicle off-road: at the rear, steep crests, harsh descents, deep ruts, and invisible edges lurk, which can immediately cause expensive damage to the body, rear panel, taillights, or the rear section if the vehicle bottoms out. This is precisely where this MorE 4x4 steel rear bumper comes in, transforming the exposed rear of the vehicle into a robust protective line for demanding overlanding and off-road use.\u003c\/p\u003e\n\u003cp\u003eMade from solid steel sheets with material thicknesses of 6, 4, and 3 mm, this rear bumper has the necessary substance to absorb impacts, twists, and contact with scree with ease. The three-point adjustment greatly facilitates precise mounting on the vehicle and ensures that the bumper sits cleanly and can be aligned controllably – a decisive advantage when converting a heavy-duty off-roader with a ladder frame.\u003c\/p\u003e\n\u003cp\u003eFor maximum durability, the bumper undergoes a consistent surface treatment of shot blasting, arc-sprayed zinc coating, and subsequent powder coating with durable Sahara polyester. This is complemented by a black textured paint in a fine crack look, which not only looks uncompromising but also provides additional robustness against abrasion and harsh off-road use. Two integrated mounts for work lights and reinforced shackle mounts make this rear solution a functional premium component for long-distance off-roaders who tolerate no weak points far from paved roads.\u003c\/p\u003e\n\u003ch3\u003eTechnical Details \/ Product Features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Nissan Navara D40, model years 2005–2014, all engine types\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Steel rear bumper for off-road use\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial thicknesses:\u003c\/strong\u003e 6 mm, 4 mm, and 3 mm steel sheet\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Precise adjustment in three planes for a perfect fit\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWork light mounts:\u003c\/strong\u003e Two integrated brackets for work lights\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTowing\/Recovery points:\u003c\/strong\u003e Reinforced mounts for shackles\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Shot blasting for optimal adhesion and increased stability\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCorrosion protection:\u003c\/strong\u003e Arc-sprayed zinc coating\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCoating:\u003c\/strong\u003e Sahara polyester powder coating with increased abrasion resistance\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint in a fine crack look\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Registration Note\u003c\/h3\u003e\n\u003cp\u003ePlease note: This off-road bumper does not have a general operating permit (ABE), no TÜV parts certificate, and no regular road approval within the scope of the StVZO (German Road Traffic Licensing Regulations). If the vehicle is to be driven on public roads, the following applies: Any potential registration by means of individual acceptance (§ 21 StVZO) must be clarified individually with the respective TÜV, Dekra, or KÜS inspector on site before purchase.\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"No \/ No","offer_id":54252850348359,"sku":"MO-Z016","price":1039.95,"currency_code":"EUR","in_stock":true},{"title":"No \/ Yes","offer_id":54253804093767,"sku":"MO-Z016-1","price":1139.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ No","offer_id":54252850381127,"sku":"MO-Z016-2","price":1109.95,"currency_code":"EUR","in_stock":true},{"title":"Yes \/ Yes","offer_id":54253804126535,"sku":"MO-Z016-3","price":1209.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/zderzak-tylny-stalowy-more-4x4-do-nissan-navara-d40_2ccb40de-9f6d-4b9b-a828-f0ba1c377e17.jpg?v=1782740198"},{"product_id":"rockslider-seitenschweller-schutzrohre-nissan-navara-d40-05-14","title":"Rockslider Seitenschweller-Schutzrohre Nissan Navara D40 05-14","description":"\u003ch2\u003eRockslider aus Stahl für Nissan Navara D40 (2005–2014)\u003c\/h2\u003e\n\u003cp\u003eWenn der Nissan Navara D40 abseits der Straße ernst machen soll, brauchen Karosserie und Schweller mehr als nur optischen Schutz: Diese MorE 4x4 Pro-Schweller wirken als robuste Rockslider und nehmen harte Kontakte mit verblockten Passagen, Felskanten und tiefen Spurrillen souverän auf. So bleibt die sensible Fahrzeugseite im harten Offroad-Alltag wirksam geschützt, während der Navara auch bei anspruchsvollen Einsätzen seine kompromisslose Linie behält.\u003c\/p\u003e\n\u003cp\u003eDie Konstruktion aus massivem Stahl ist auf maximale Steifigkeit und Belastbarkeit ausgelegt. Mit 3 mm Wandstärke im Profil und 6 mm starken Trägern entstehen extrem widerstandsfähige Seitenschweller für den Einsatz auf Expeditionen, im schweren Geländeeinsatz und bei echten Belastungsspitzen. Die hochwertige Oberflächenveredelung mit Kugelstrahlen, Zinkspritzlackierung, Sahara-Pulverbeschichtung und schwarzem Strukturlack in feiner Riss-Optik sorgt dabei für einen kompromisslosen Premium-Look und zusätzlichen Schutz gegen Abrieb und Korrosion.\u003c\/p\u003e\n\u003ch3\u003eTechnische Details \/ Produktmerkmale\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduktart:\u003c\/strong\u003e Offroad-Rockslider\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFahrzeug:\u003c\/strong\u003e Nissan Navara D40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaujahre:\u003c\/strong\u003e 2005–2014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stahl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLänge:\u003c\/strong\u003e 217 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfilstärke:\u003c\/strong\u003e 3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStärke der Träger:\u003c\/strong\u003e 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMontagehinweis:\u003c\/strong\u003e Für maximale Steifigkeit und Haltbarkeit wird eine Verschweißung mit dem Rahmen empfohlen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOberflächenbehandlung:\u003c\/strong\u003e Kugelstrahlen, Zinkspritzlackierung, Sahara-Pulverbeschichtung und schwarzer Strukturlack in feiner Riss-Optik\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEinsatzbereich:\u003c\/strong\u003e Schwerer Offroad-Einsatz, Expeditionen, Schutz der Fahrzeugseiten im Gelände\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54263505322311,"sku":"MO-PR010","price":679.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/progi-boczne-nissan-navara-d40-05-14.jpg?v=1782900538"},{"product_id":"schnorchel-nissan-navara-d40-snorkel","title":"Schnorchel Nissan Navara D40 Snorkel","description":"\u003ch2\u003eSnorkel aus hochfestem ABS-Kunststoff für Nissan Navara D40\u003c\/h2\u003e\n\u003cp\u003eWer mit dem Nissan Navara D40 in Flussdurchfahrten, Schlammpassagen oder tiefen Spurrillen unterwegs ist, kennt das Risiko: Schon ein einziger Wasserschlag kann das Triebwerk binnen Sekunden schwer beschädigen. Genau hier setzt dieser passgenaue Snorkel an und verlegt den Ansaugpunkt in den sicheren, höherliegenden Bereich – weit weg von Spritzwasser, Staub und aufgewirbeltem Schmutz, der im harten Offroad-Alltag permanent auf den Luftfilter einwirkt.\u003c\/p\u003e\n\u003cp\u003eGefertigt aus schlagfestem, widerstandsfähigem ABS-Kunststoff, ist dieser Luftansaugstutzen auf den kompromisslosen Einsatz im Gelände ausgelegt. Er schützt den 2.5-Liter-Dieselmotor zuverlässig bei Wasserdurchfahrten und auf staubigen Fernreise-Expeditionen, während die fahrzeugspezifische Ausführung für den Nissan Navara D40 (Baujahre 2005–2014, linke Fahrzeugseite) eine saubere, funktionale Integration ermöglicht. Das Ergebnis: mehr Betriebssicherheit für schwere Einsätze abseits der Straße.\u003c\/p\u003e\n\u003ch3\u003eTechnische Details \/ Produktmerkmale\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduktart:\u003c\/strong\u003e Snorkel \/ Luftansaugung \/ Ansaugschnorchel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFahrzeugmodell:\u003c\/strong\u003e Nissan Navara D40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKompatibilität:\u003c\/strong\u003e Baujahre 2005–2014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotorisierung:\u003c\/strong\u003e 2.5L Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEinbauposition:\u003c\/strong\u003e Linke Fahrzeugseite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Hochfestes, schlag- und abriebfestes ABS-Kunststoff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunktion:\u003c\/strong\u003e Schutz des Motors vor Wasseransaugung, Staub und Schmutz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLieferumfang:\u003c\/strong\u003e Komplettsatz mit allen für die Montage erforderlichen Komponenten\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHinweis zur Montage:\u003c\/strong\u003e Je nach Fahrzeugzustand können Anpassungen und eine zusätzliche Abdichtung des Luftfilters erforderlich sein\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWichtiger Zulassungshinweis\u003c\/h3\u003e\n\u003cp\u003eBitte beachten: Dieses Offroad-Zubehör besitzt keine allgemeine Betriebserlaubnis (ABE), kein TÜV-Teilegutachten und keine reguläre Straßenzulassung im Bereich der StVZO. Wenn das Fahrzeug im Straßenverkehr gefahren werden soll, gilt: Eine potenzielle Eintragung im Wege einer Einzelabnahme (§ 21 StVZO) ist zwingend vor dem Kauf mit dem jeweiligen TÜV-, Dekra- oder KÜS-Prüfer vor Ort individuell zu klären.\u003c\/p\u003e","brand":"MorE 4x4","offers":[{"title":"Default Title","offer_id":54263507648839,"sku":"MO-SND40A","price":169.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/3240\/5575\/files\/snorkel-wlot-powietrza-nissan-navara-d40_f822213d-a91b-46b2-961b-92276e741c43.jpg?v=1782900573"}],"url":"https:\/\/overlanding-gear.fr\/en\/collections\/navara-d40.oembed","provider":"Overlanding Gear","version":"1.0","type":"link"}